Intelligent Dip Test Method for Performance Analysis of Polymeric Coating Material

Authors

  • Rajini H. School of Electrical and Electronics Engineering, REVA University, Bangalore, India 560064
  • K. N. Ravi School of Electrical and Electronics Engineering, REVA University, Bangalore, India 560064
  • Vasudev N. School of Electrical and Electronics Engineering, REVA University, Bangalore, India 560064

Keywords:

Aging, Dip test, Pollution

Abstract

Porcelain and glass insulators are coated with Room temperature vulcanizing (RTV) silicone rubber coating due to its excellent leakage current suppression characteristics to overcome the pollution problem. The reliability of leakage current on various samples of the glass plate sample is studied and reported. In this study, the withstand capability of RTV coated insulators for pollution were evolved, and based on the experimental results long term aging performance of different RTV coated insulators was evaluated

Downloads

Download data is not yet available.

References

Gorur, R. S., Cherney, E., De Tourreil, C., Dumora, D., Harmon, R., Hervig, H., ... Wiita- nen, D. (1995). Protective coatings for improving contamination performance of outdoor high voltage ceramic insulators. IEEE transactions on power delivery, 10(2), 924-933.

Kim, S. H., E. A. Cherney, and R. Hackam. ”Effects of filler level in RTV silicone rubber coatings used in HV insulators.” IEEE Transactions on electrical insulation 27, no. 6 (1992): 1065-1072.

Gorur, R. S., et al. ”A laboratory test for tracking and erosion resistance of HV outdoor insulation.” IEEE Transactions on Dielectrics and Electrical insulation 4.6 (1997): 767- 774.

Fernando, M. A. R. M., and S. M. Gubanski. ”Leakage currents on non-ceramic insulators and materials.” IEEE Transactions on Dielectrics and Electrical Insulation 6, no. 5 (1999): 660-667.

J.Banhthasit, B., Tonmitra, K., Suksri, A., Kaewrawang, A., Leeparkobboon, M. (2011). A Comparison on Leakage Current of 22 kV Porcelain Insulator Using High Voltage AC and Impulse Voltage via a Rotating Wheel Dip Test. International Journal of Computer and Electrical Engineering, 3(3), 409.

Krivda, A., Schmidt, L. E., Kornmann, X., Ghorbani, H., Ghorbandaeipour, A., Eriksson, M., Hillborg, H. (2009). Inclined-plane tracking and erosion test according to the IEC 60587 standard. IEEE Electrical Insulation Magazine, 25(6), 14-22.

Krzma, A. S., Maurizio Albano, and A. Haddad. ”Comparative performance of 11kV sili- cone rubber polymeric insulators under Rotating Wheel Dip Test.” 2014 49th International Universities Power Engineering Conference (UPEC). IEEE, 2014.

Meng, Delun, et al. ”Tracking and erosion properties evaluation of polymeric insulat- ing materials.” 2016 IEEE International Conference on High Voltage Engineering and Application (ICHVE). IEEE, 2016.

Kumagai, Seiji, Masafumi Suzuki, and Noboru Yoshimura. ”Electrical performances of RTV silicone rubber coatings in salt-fog and rotating wheel dip tests.” IEEJ Transactions on Fundamentals and Materials 121.4 (2001): 324-331.

Rajini, H., K. N. Ravi, and N. Vasudev. ”A Study on RTV Coating: Ageing and Reduc- tion of Coating Length on Insulator.” In 2019 International Conference on High Voltage Engineering and Technology (ICHVET), pp. 1-5. IEEE, 2019

Glass Plate Test Samples used for Dip test (a) Full Length RTV Coated (b) Un- coated Glass plate (c) ½ Length RTV coated (d) 1/4th length RTV coated (e) 3/4th length RTV coated

Downloads

Published

17.05.2023

How to Cite

H., R., Ravi , K. N. ., & N., V. . (2023). Intelligent Dip Test Method for Performance Analysis of Polymeric Coating Material. International Journal of Intelligent Systems and Applications in Engineering, 11(6s), 576–583. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/2889

Issue

Vol. 11 No. 6s (2023)

Section

Research Article

License

Copyright (c) 2023 Rajini H., K. N. Ravi , Vasudev N.

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.

IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.