Savonius Vertical Axis Wind Turbine Design and Analysis with Dimples and Fins
Keywords:
Vertical Axis Wind Turbine, Savonius Wind Turbine, CFD, Aerodynamic Performance, Dimples and Fins.Abstract
As a solution to the worldwide energy dilemma and growing global emissions, innovative work in the field of environmentally friendly power, eminently wind and sun oriented, has expanded rapidly as of late [1]. A horizontal axis wind turbine is not suitable for residential use. With its ability to produce energy even in low-wind conditions, the Savonius vertical-pivot wind turbine might be a more dependable other option. [2]. The motivation behind this model is to exhibit the upsides of the upward hub wind turbine over the more conventional even pivot plan under an extensive variety of wind conditions and to energize its far reaching reception as a reasonable method for creating power not long from now. [3].
Downloads
References
Livya. E et. al. “Aerodynamic analysis of dimple effect over aircraft wing”, International journal of mechanical aerospace industrial and mechatronics engineering, Volume 9(2015).
Deepak Kr. Sharma et. al. “Design and Analysis of Savonius Vertical Axis Wind Turbine”, International Journal of Innovations in Engineering and Science, Vol. 3, No.5, 2018 www.ijies.net.
Shafiqur Rehman et al., Horizontal Axis Wind Turbine Blade Design Methodologies for Efficiency Enhancement - A Review”, Energies 2018, 11, 506; doi:10.3390/en11030506.
Livya. E et. al. “Aerodynamic analysis of dimple effect over aircraft wing”, International journal of mechanical aerospace industrial and mechatronics engineering, Volume 9(2015).
K. S. Jeon, J. I. Jeong, J.-K. Pan, and K.-W. Ryu, “Effects of end plates with various shapes and sizes on helical Savonius wind turbines,” Renew. Energy, vol. 79, pp. 167–176, 2015.
M. Rajaram Narayanan et. al. “Design and Analysis of a Wind Turbine Blade with Dimples to Enhance the Efficiency through CFD with ANSYS R16.0” MATEC Web of Conferences 207, (2018) ICMMPM 2018 © The Authors, published by EDP Sciences.
N. H. Mahmoud, et al, "An experimental study on improvement of Savonius rotor performance," Alexandria Engineering Journal, vol. 51, pp. 19-25, 2012.
Arun K.K et. al. “Analyzing the Effect of Dimples on Wind Turbine Efficiency Using CFD”, International Journal of Applied Engineering Research, Volume 13, Number 6 (2018) pp. 4484-4489.
G, A. ., K, S. ., S, B. ., M, B. ., & M, P. . (2023). Power Consumption and Carbon Emission Equivalent for Virtualized Resources – An Analysis: Virtual Machine and Container Analysis for Greener Data Center. International Journal on Recent and Innovation Trends in Computing and Communication, 11(1), 110–116. https://doi.org/10.17762/ijritcc.v11i1.6057
Deepenshu Srivastav. “Flow control over airfoils using different shaped dimples”, International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT) IPCSIT, Volume 33, IACSIT Press, Singapore.(2012)
Ilham Satrio Utomo et. al. “Experimental Studies Of Savonius Wind Turbines With Variations Sizes And Fin Numbers Towards Performance”, AIP Conference Proceedings 1931, 030041 (2018).
M. Rajaram Narayanan et. al. “Design and Analysis of a Wind Turbine Blade with Dimples to Enhance the Efficiency through CFD with ANSYS R16.0” MATEC Web of Conferences 207, (2018) ICMMPM 2018 © The Authors, published by EDP Sciences.
Ali, MH. Experimental Comparison Study for Savonius Wind Turbine of Two and Three Blades at Low Wind Speed. Int. J. Modern Eng.Research, Vol.3 issue 5, 2013, p. 2978-2986.
F. Bertagnolio, F. Bertagnolio, N. N. Sørensen, N. N. Sørensen, J. Johansen, and J. Johansen, “Profile catalogue for airfoil sections based on 3D computations,” 2006.
F. Wenehenubun, A. Saputra, and H. Sutanto, "An experimental study on the performance of Savonius wind turbines related with the number of blades " Energy Procedia, vol. 68, p. 7, 2015.
Smith, J., Jones, D., Martinez, J., Perez, A., & Silva, D. Enhancing Engineering Education through Machine Learning: A Case Study. Kuwait Journal of Machine Learning, 1(1). Retrieved from http://kuwaitjournals.com/index.php/kjml/article/view/86
Gedyon Fikade et. al. “Effects of Dimples on Aerodynamic Performance of Horizontal Axis Wind Turbine Blades”, International Research Journal of Engineering and Technology (IRJET), Volume: 07 Issue: 01 | Jan 2020.
M. Mahmood et al., “Vertical axis wind turbine – A review of various configurations and design techniques,” Renew. Sustain. Energy Rev., vol. 16, no. 4, pp. 1926–1939, 2012.
M.Islam, DSK. Ting, A. Fartaj. Aerodynamic models for Darrius type straight bladed vertical axis wind turbines, Renew, sust. Energy rev. 12 (4) 2008 pp. 1087-1109.
Mathew S 2006 Wind Energy: Fundamentals, Resources Analysis, and Economics Berlin: Springer.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.
IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.