Comparative Analysis of Different Controllers for Adjustable Speed Switched Reluctance Motor using Closed Loop Operation

Authors

  • Padmashree V. Kulkarni Associate Professor, Department of Electrical and Electronics Engineering, Don Bosco Institute of Technology, Bengaluru, India
  • H. V. Govindaraju Associate Professor, Department of Electrical and Electronics Engineering, Dr. Ambedkar Institute of Technology, Bengaluru, India
  • Babitha S. Associate Professor, Department of Electronics and communication Engineering, Don Bosco Institute of Technology, Bengaluru, India

Keywords:

Closed loop operation, Fuzzy Logic Controller, Proportional Integral Controller, Proportional Integral Derivative Controller, Switched Reluctance Motor

Abstract

Controllers are designed to enhance speed performance as well as lowering the torque ripple of switched reluctance motors.  Development of controllers in this paper involves the use of fuzzy sets for various membership functions, the PI and PID controllers in MATLAB SIMULink environment. Here, SRM speed and torque regulated over a large bandwidth using Fuzzy, PI, and PID controllers. Furthermore, the simulated speed is measured and matched with the reference speed; speed errors are processed by the controller. Finally, simulation results are obtained for  speed, and torque for PI, PID, and Fuzzy Logic controllers, and  comparison is performed with respect to speed response and torque ripple. The results obtained using the Matlab platform may help further the analysis and improvement of controller design for switched reluctance motors.

Downloads

Download data is not yet available.

References

L Ananda Padmanaban & P.sarvanan “Design, analysis and comparison of switched reluctance motors for electric vehicle application “, VOL. 64, NO. 2, 239–247, 2023.

Kavana E, Rudranna Nandihalli “Speed Control of Switched Reluctance Motor”, JETIR, Volume 9, Issue 6, ISSN-2349-5162, June 2022.

Hafeezul Haq, Halil Ibrahim “FLC-DTC Method for Torque Ripples Minimization of 8/6 Switched Reluctance Motors Drive”, JAREE-Journal on Advance Research in Electrical Engineering, Volume4, Number 1, April 2020,pp .51-55.

Padmashree V. Kulkarni, Jyoti Koujalagi, Babitha S” LabVIEW Based Model of Switched Reluctance Motor using PI Controller”, International Journal of Recent Technology and Engineering (IJRTE), ISSN: 2277-3878, Volume-8, Issue-6, March 2020.

Zeki OMAÇ, “Fuzzy-logic-based robust speed control of switched reluctance motor for low and high speeds”, Turkish Journal of Electrical Engineering & Computer Sciences, 2019, pp 316 – 329.

Ghunter P. Viajante, Eric N. Chaves, Luiz C. Miranda, Marcos A. A. Freitas, Carlos A. Queiroz, Josemar A. Santos “Design and Implementation of a Fuzzy Control System Applied to a 6x4 SRG”, International Conference on Environment and Electrical Engineering, IEEE,2019.

Ali Uysal, Serdar Gokay, Emel Soylu, Tuncay Soylu, Serkan Caska,” Fuzzy proportional-integral speed control of switched reluctance motor with MATLAB/Simulink and programmable logic controller communication", Measurement and control, Vol. 52(7-8), 2019, 1137–1144.

Maheshbabu Valeti,D.sussitra, "Methods of torque ripple minimization techniques on switched reluctance motor”, IJRTE Journal of Recent technology and Engineering, volume 8 ,Issue 24, 2019,204-208.

Reyad Abdel-Fadil, László Számel, “State of the Art of Switched Reluctance Motor Drives and Control Techniques,” Twentieth International Middle East Power Systems Conference (MEPCON), Cairo University, Egypt, 2018 pp. 779–784.

Abid Ali Shah Bukhari,1 Belema Prince Alalibo, Wenping Cao, Zhengyu Lin, Shahid Hussain Shaikh, Toufique Ahmed Soomro , Shahzeb Ansari Fayyaz Ali Jandan “Switched reluctance motor design for electric vehicles based on harmonics and back EMF analysis,” IET Journals,2018, pp 1–6.

Ganesh Velmurgan,serhiy Bozhko,Tao Yang”A Review of Torque ripple minimization techniques in switched reluctance Machine”, IEEE, 2018,978-1-5386-4192-7.

Reyad Abdel-Fadil, László Számel, “Enhancement of the Switched Reluctance Motor Performance for Electric Vehicles Applications Using Predictive Current Control,” International Conference and Workshop in Óbuda on Electrical and Power Engineering, IEEE, 2018.

P.Pranay Kumar,” Torque ripple minimization of a switched reluctance Motor using Fuzzy logic control current compensation technique”, International Journal of pure and applied Mathematics, volume 120,No .6,2018.

Control and Simulation in LabVIEW by V Hans-Petter Halvorsen.2017.

Vikramarajan Jambulingam, “Fuzzy Logic Controller Design for Switched Reluctance Motor”, International Journal of Science and Research (IJSR), Volume 5, Issue 4, April 2016, 2319-7064

Humor Nagy,Mircea Ruba ,Horia Hedesiu,claudia Martis”Rapid control Prototyping of a speed control strategy for a switched reluctance Machine”, International conference and exposition on electrical and power engineering, 2016,664-668.

Mrs.K. Radha Rani, Ms.S K.Salma, Sri A. Raghunath and Sri K. Praveen Kumar, “Comparative Study of Speed Control of 6/4 Switched Reluctance Motor Using Hybrid Fuzzy Logic Controller”, IJCTA, Vol.8, No.1, 2015, 253-263.

Mou-Lin Jin* and Ming-Chun Ho, “ LabVIEW-based Fuzzy Controller Design Of A Lighting Control System”, Journal of Marine Science and Technology, Vol. 17, No. 2, 2009, pp 116-121.

Liu, L. ., Huang, Y. ., Zhao, M. ., & Ruan, Y. . (2023). Parametric Modeling and Optimization of Switched Reluctance Motor for EV. The Applied Computational Electromagnetics Society Journal (ACES), 37(09), 948–958. https://doi.org/10.13052/2022.ACES.J.370904

H. Torkaman1 , E. Afjei2 , N. Ghadimi3 , A. Gorgani, " Comparative Electromagnetic Evaluation of Different Structures of Switched Reluctance Motors", International Review of Electrical Engineering, Vol. 7, N. 2, 3885-3890.

Jun Cai, Zhiquan Deng, "A Fault-Tolerant Sensorless Control Method For Switched Reluctance Motor s", Vol. 7, N. 2, 3857-3865.

V. Wilson and P. G. Latha, “Review on Solutions to Acoustic Noise Problems in Switched Reluctance Motor Using Radial Force Improvement with Two Stage Commutation for EV Applications,” International Review of Electrical Engineering (IREE), vol. 17, no. 2. Praise Worthy Prize, p. 164, Apr. 30, 2022. doi: 10.15866/iree.v17i2.21379.

Abdelhakim Idir, Khatir Khettab, Yassine Bensafia, “Design of an Optimally Tuned Fractionalized PID Controller for DC Motor Speed Control Via a Henry Gas Solubility Optimization Algorithm”, International Journal of Intelligent Engineering and Systems, Vol.15, No.3, pp. 59-70, 2022.

S., B. ., Govindaraju, H. V. ., Kulkarni, P. V. ., S., R. ., & Koujalagi, J. P. . (2023). Real Time Implementation of Fuzzy Controller to Minimize Torque Ripple in Switched Reluctance Motor. International Journal of Intelligent Systems and Applications in Engineering, 11(3), 308–317. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/3171

Chhabra, G. (2023). Comparison of Imputation Methods for Univariate Time Series. International Journal on Recent and Innovation Trends in Computing and Communication, 11(2s), 286–292. https://doi.org/10.17762/ijritcc.v11i2s.6148

Wanjiku , M., Levi, S., Silva, C., Ji-hoon, P., & Yamamoto, T. Exploring Feature Selection Methods in Support Vector Machines. Kuwait Journal of Machine Learning, 1(3). Retrieved from http://kuwaitjournals.com/index.php/kjml/article/view/131

Shukla, A., Juneja, V., Singh, S., Prajapati, U., Gupta, A., & Dhabliya, D. (2022). Role of hybrid optimization in improving performance of sentiment classification system. Paper presented at the PDGC 2022 - 2022 7th International Conference on Parallel, Distributed and Grid Computing, 541-546. doi:10.1109/PDGC56933.2022.10053333 Retrieved from www.scopus.com

Downloads

Published

21.09.2023

How to Cite

Kulkarni, P. V. ., Govindaraju, H. V. ., & S., B. . (2023). Comparative Analysis of Different Controllers for Adjustable Speed Switched Reluctance Motor using Closed Loop Operation. International Journal of Intelligent Systems and Applications in Engineering, 11(4), 132–140. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/3461

Issue

Vol. 11 No. 4 (2023)

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.

IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.