Data Transmission Framework for the Internet of Things: Safe and Power-Proficient

Authors

  • K. Pradeepa Assistant Professor, Department of Computer Science, Cauvery College for Women (Autonomous), Trichy.
  • M. Parveen Professor and Head, Department of Information Technology, Cauvery College for Women (Autonomous), Trichy. Affiliated to Bharathidasan University

Keywords:

IoT gadgets, Clustering, Cryptography, Signature, Ciphertext shifting, PSKTS algoritham

Abstract

Researchers and corporations have been paying close attention to the Internet of Things (IoT) concept lately. Building different smart systems, such the smart grid, smart city, and smart healthcare, requires a base station in the Internet of Things to handle data that is collected from millions of sensor devices. To guarantee the accuracy of the data collected, a secure link needs to be established between the base station and the sensor units. If the information is tainted, the results of the data analysis will be inaccurate and result in more serious harm. In addition, many IoT gadgets have relatively little interaction because of their incredibly low-power computational CPUs. A critical performance measure to take into account while developing a routing algorithm with low-power IoT devices is power efficiency. Thus, a secure and energy-efficient data transmission framework (SE-DTF) for the Internet of Things was introduced in this research. The results of the experiment show how safely a public and a secret key may be shared with a token via the IoT-PSKTS algorithm. It also proves that the throughput, power consumption, and packet delivery ratio of the MPCR using the HFLC algorithm are better than those of other methods. It also shows that compared to other cryptography systems, the two-tier cryptography methodology consumes less energy and requires less processing time for encryption and decoding.

Downloads

Download data is not yet available.

References

Sankar, S., & Srinivasan, P. (2018). Multi-layer cluster-based energy-aware routing protocol for the IoT. Cybern. Inf. Technol, 18(3), 75-92.

Sujanthi, S., & Kalyani, S. N. (2020). SecDL: QoS-aware secure deep learning approach for dynamic cluster-based routing in WSN-assisted IoT. Wireless Personal Communications, 114(3), 2135-2169.

Aranzazu-Suescun, C., & Cardei, M. (2019). Anchor-based routing protocol with dynamic clustering for IoT WSNs. EURASIP Journal on Wireless Communications and Networking, 2019(1), 1-12.

Maheswar, R., Jayarajan, P., Sampathkumar, A., Kanagachidambaresan, G. R., Hindia, M. N., Tilwari, V., ... & Amiri, I. S. (2021). CBPR: A cluster-based backpressure routing for the IoT. Wireless Personal Communications, 1-19.

Li, J., Silva, B. N., Diyan, M., Cao, Z., & Han, K. (2018). A clustering-based routing algorithm in IoT-aware Wireless Mesh Networks. Sustainable cities and society, 40, 657-666.

J. Tang, H. Song, A. Xu, Y. Jiang, H. Wen, Y. Zhang, K. Qin, "Secret Sharing Simultaneously on the Internet of Things," 2020 IEEE International Conference on Power, Intelligent Computing and Systems, ISBN: 978-1-7281-9874-3, Jul 2020.

M. Farhadi, H. Bypour, R. Mortazavi, "An efficient secret sharing-based storage system for cloud-based IoT," 2019 IEEE 16th International ISC Conference on Information Security and Cryptology, ISBN: 978-1-7281-4374-3, Aug 2019.

Maheswar, R., Jayarajan, P., Sampathkumar, A., Kanagachidambaresan, G. R., Hindia, M. N., Tilwari, V., ... & Amiri, I. S. (2021). CBPR: A cluster-based backpressure routing for the IoT. Wireless Personal Communications, 1-19.

Kumar, N. P. R., & Gnanadhas, J. B. (2020). Cluster Centroid-Based Energy Efficient Routing Protocol for WSN-Assisted IoT. Advances in Science, Technology, and Engineering Systems Journal, 5(4), 296-313.

Sankar, S., & Srinivasan, P. (2018). Multi-layer cluster-based energy-aware routing protocol for the IoT. Cybern. Inf. Technol, 18(3), 75-92.

Zhang, K., Long, J., Wang, X., Dai, H. N., Liang, K., & Imran, M. (2020). Lightweight searchable encryption protocol for the industrial IoT. IEEE Transactions on Industrial Informatics, 17(6), 4248-4259.

Yousefi, S. M. Jameii, "Improving the security of IoT using encryption algorithm," 2017 IEEE International Conference on IoT and Application, ISBN: 978-1-5386-1698-7, May 2017.

Choudhary, K., Gaba, G. S., Butun, I., & Kumar, P. (2020). Make-it—a lightweight mutual authentication and key exchange protocol for the industrial IoT. Sensors, 20(18), 5166.

Schuster, R., Shmatikov, V., & Tromer, E. (2018, October). Situational access control in the IoT. In Proceedings of the 2018 ACM SIGSAC Conference on Computer and Communications Security (pp. 1056-1073).

Terkawi, N. Innab, S. A. Amri, A. A. Amri, "IoT Increasing the Necessity to Adopt Specific Type of Access Control Technique," 2018 IEEE 21st Saudi Computer Society National Computer Conference, ISBN: 978-1-5386-4110-1, Apr 2018.

W. J. Buchanan, D. Lanc, E. Ukwandu, L. Fan, G. Russell, and O. Lo, "The Future Internet: A World of Secret Share," Future Internet 2015, 7, 445-464, DOI:10.3390/fi7040445.

Maheswar, R., Jayarajan, P., Sampathkumar, A., Kanagachidambaresan, G. R., Hindia, M. N., Tilwari, V., ... & Amiri, I. S. (2021). CBPR: A cluster-based backpressure routing for the IoT. Wireless Personal Communications, 1-19.

Preethi, R., & Sughasiny, M. (2018, December). AKCSS: An Asymmetric Key Cryptography Based on Secret Sharing in Mobile Ad Hoc Network. In International Conference on Intelligent Systems Design and Applications (pp. 73-86). Springer, Cham.

Venu, S., Kotti, J., Pankajam, A., Dhabliya, D., Rao, G.N., Bansal, R., Gupta, A., Sammy, F. Secure Big Data Processing in Multihoming Networks with AI-Enabled IoT (2022) Wireless Communications and Mobile Computing, 2022, art. no. 3893875,

Vadivu, N.S., Gupta, G., Naveed, Q.N., Rasheed, T., Singh, S.K., Dhabliya, D. Correlation-Based Mutual Information Model for Analysis of Lung Cancer CT Image (2022) BioMed research international, 2022, p. 6451770.

Downloads

Published

05.12.2023

How to Cite

Pradeepa, K. ., & Parveen, M. . (2023). Data Transmission Framework for the Internet of Things: Safe and Power-Proficient. International Journal of Intelligent Systems and Applications in Engineering, 12(7s), 394–403. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/4088

Issue

Section

Research Article