An IoT Based Intelligent and Smart Helmet for Bike Riders Using Arduino
Keywords:
Helmet, alcohol sensor, transmitter, receiverAbstract
The increasing number accidents involving two- wheelers has prompted the need for a safer and more secure riding experience. In this context, the development of a smart helmet integrated with an Arduino nano microcontroller has been proposed. The helmet safety features include that the prevention of bike starting without the helmet, accident detection can be done by using a vibration sensor, and the sending of an emergency message to pre-defined contacts. Additionally, the helmet also detects the rider's consumption of alcohol, and the bike cannot start if the alcohol level is above the permissible limit. This paper describes how the smart helmet was created and put into use, including the hardware and software component part used. The performance of the helmet was evaluated in real-world scenarios, and the results were found to be promising. The complete system was mounted on the helmet that consists of transmitter and receiver section.
Downloads
References
Rasli, Mohd Khairul Afiq Mohd, Nina Korlina Madzhi, and Juliana Johari. "Smart helmet with sensors for accident prevention." Electrical, Electronics and System Engineering (ICEESE), 2013 International Conference on. IEEE, 2013
Rasli, Mohd Khairul Afiq Mohd, Nina Korlina Madzhi, and Juliana Johari. "Smart helmet with sensors for accident prevention." Electrical, Electronics and System Engineering (ICEESE), 2013 International Conference on. IEEE, 2013.
Patil, Sagar, et al. "Smart motorcycle security system." Emerging Trends in Engineering, Technology and Science (ICETETS), International Conference on. IEEE, 2016.
Almohammed, Abdulaziz, et al. "Smart helmet for motorcyclists." 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, 2017.
Biswas, Joydeep, et al. "An Intelligent Safety Helmet for Industrial Workers." 2016 IEEE International Conference on Advanced Manufacturing (ICAM). IEEE, 2016.
Harish Chandra Mohanta, Rajat Kumar Mahapatra and Jyotirmayee Muduli, “Anti-Theft Mechanism Framework with Accidental Avoidance and Cabin Safety Framework for Automobiles", International Refereed Journal of Engineering and Science (IRJES), vol. 3, no. 4, pp. 56- 62, June 2014.
Chiang, Wei-Yu, et al. "Intelligent Smart Helmet for Oil Refinery Workers." IEEE Transactions on Industrial Informatics 13.4 (2017): 2083-2092.
Sudarsan K and Kumaraguru Diderot P, "Head protector for Road Hazard Warning with Wireless Bike Confirmation and Traffic Adaptive Mp3 Playback", in Worldwide Journal of Science and Research (IJSR), vol. 3, No. 3, 2014.
Kim, Seulgi, et al. "An intelligent helmet with built-in air quality monitoring system for hazardous environment." 2016 IEEE International Conference on Consumer Electronics (ICCE). IEEE, 2016.
Li, Shijie, et al. "Smart helmet with fall detection and emergency alarm system." 2018 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2018.
Lin, Wen-Hsing, et al. "Development of a smart helmet for construction workers." IEEE Transactions on Automation Science and Engineering 14.3 (2016): 1426-1435.
Liu, Dongming, et al. "Smart helmet for coal miners using ZigBee technology." 2016 IEEE Global Conference on Signal and Information Processing (GlobalSIP). IEEE, 2016.
Pham, Minh-Tri, et al. "Intelligent Helmet for Safety and Attendance Monitoring in Construction Sites." 2019 IEEE International Conference on Engineering and Technology (ICET). IEEE, 2019.
Chun-Lung Chiu; Chen, Y.-T.; You-Len Liang; Ruey-Hsun Liang; " Optimal Driving Efficiency Design for the Single-Phase Brushless DC Gear Motor Magnetics”, IEEE Transactions on, vol.46, no.4, pp.1123-1130, April 2010.
S. Kanetkar, A. Rathore, K. Maheshwari, P. Dubey, and A. Saxena, “Smart Helmet Wiper,” 2020 IEEE Int. Students’ Conf. Electr. Electron. Comput. Sci. SCEECS 2020, pp. 6–9, 2020, doi: 10.1109/SCEECS48394.2020.40.
A. K. and G. P. H. C. J. Behr, “A smart helmet for air quality and hazardous event detection for the mining industry,” Int. J. Innov. Technol. Explor. Eng., pp. 2026– 2031, 2016, doi: 10.35940/ijitee.L3947.1081219.
N. Nataraja, K. S. Mamatha, Keshavamurthy, and Shivashankar, “Smart Helmet,” 2018 3rd IEEE Int. Conf. Recent Trends Electron. Inf. Commun. Technol. RTEICT 2018 - Proc., pp. 2338–2341, 2018, doi: 10.1109/RTEICT42901.2018.9012338.
N. Divyasudha, P. Arulmozhivarman, and E. R. Rajkumar, “Analysis of Smart helmets and Designing an IoT based smart helmet: A cost effective solution for Riders,” Proc. 1st Int. Conf. Innov. Inf. Commun. Technol. ICIICT 2019, pp. 1–4, 2019, doi: 10.1109/ICIICT1.2019.8741415.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.
IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.
