A Review on Design & Analysis of An Operational Quad Band UWB Antenna with Triple-Band Notch Using EBG Structure

Authors

  • Amit M. Patil Suresh Gyan Vihar University, Jaipur, Rajasthan, INDIA
  • Sandhya Sharma Suresh Gyan Vihar University, Jaipur, Rajasthan, INDIA
  • Harish S. Motekar Bharati Vidyapeeth Deemed University, DET, Kharghar, Navi Mumbai, Maharashtra, INDIA
  • Rajkumar S. Sawant Bharati Vidyapeeth Deemed University, DET, Kharghar, Navi Mumbai, Maharashtra, INDIA
  • Ravi S. Kolhe Bharati Vidyapeeth Deemed University, DET, Kharghar, Navi Mumbai, Maharashtra, INDIA
  • Pandurang T. Mohite Bharati Vidyapeeth Deemed University, DET, Kharghar, Navi Mumbai, Maharashtra, INDIA

Keywords:

UWB Antenna design, Electromagnetic Band Gap (EBG), Band notch techniques, Quad Band

Abstract

The Federal Communications Commission has allocated the frequency spectrum ranging from 3.1 to 10.6 GHz for use by commercial ultra-wideband (UWB) communication equipment. Due to its low energy levels and vast bandwidth (usually higher than 500 MHz), ultra-wideband (UWB) technology has several potential uses in short-range communications. The necessary multiband operation and triple notch features are achieved by using several architectures. Many modern electronic gadgets, including cellphones, military gear, and wireless wearables, make use of microstrip patch antennas. This study compares and contrasts several ultra-wideband (UWB) antennas that use a triple-band notch, as well as various notching approaches, with more conventional antennas.

Downloads

Download data is not yet available.

References

T. Gayatri;G. Srinivasu;D.M.K. Chaitanya;V.K. Sharma, “Design and Analysis of a Compact Wrench Shaped UWB Antenna for Spectrum Sensing in 3.1GHz to 10.6GHz”, IEEE International RF and Microwave Conference (RFM), DOI: 10.1109/RFM50841.2020.9344798,2020.

M. M. Hasan Mahfuz;Md Mohiuddin Soliman;Md Rafiqul Islam, “Design of UWB Microstrip Patch Antenna with Variable Band Notched Characteristic for Wi-MAX Application”, IEEE Student Conference on Research and Development (SCOReD), DOI: 10.1109/SCOReD50371.2020.9250947,2020.

Rani R. Kodali1, Polepalli Siddaiah2, and Mahendra N. G. Prasad3, “Design of Quad Band Operational UWB Antenna with Triple Notch Bands Using Meander Line Slot”, Progress In Electromagnetics Research M, Vol. 109, 63–73,2022.

Anees Abbas;Niamat Hussain;Jaemin Lee;Seong Gyoon, “Triple Rectangular Notch UWB Antenna Using EBG and SRR”, IEEE Access ( Volume: 9) DOI: 10.1109/ACCESS.2020.3047401,2020.

Yadav, A., D. Sethi, R. K. Khanna, “Slot loaded UWB antenna: Dual band notched characteristics,” AEU — International Journal of Electronics and Communications, Vol. 70, No. 3, 331–335, March 2016.

Deqiang Yang, Huiling Zeng, Sihao Liu*, and Jin Pan, “A Vivaldi Antenna with Switchable and Tunable Band-Notch Characteristic”, Progress In Electromagnetics Research C, Vol. 68, 75–83, 2016.

Modak, S., T. Khan, and R. H. Laskar, “Loaded UWB monopole antenna for quad band-notched characteristics,” IETE Technical Review, 1–9, 2021, doi:10.1080/02564602.2021.1878942.

A. Iqbal, A. Smida, N. Mallat, M. Islam, and S. Kim, ‘‘A compact UWB antenna with independently controllable notch bands,’’ Sensors, vol. 19, no. 6, p. 1411, Mar. 2019.

M. A. Trimukhe and B. G. Hogade, ‘‘Compact Ultra-wideband antenna with triple band notch characteristics using EBG structures,’’ Prog. Electromagn. Res. C., vol. 8, no. 7, pp. 1069–1075, Nov 2016.

Q.-X. Chu, C.-X. Mao, and H. Zhu, ‘‘A compact notched band UWB slot antenna with sharp selectivity and controllable bandwidth,’’ IEEE Trans. Antennas Propag., vol. 61, no. 8, pp. 3961–3966, Aug. 2013.

M. J. Jeong, N. Hussain, H. Bong, J. W. Park, K. S. Shin, S. W. Lee,S. Y. Rhee, and N. Kim, ‘‘Ultrawideband microstrip patch antenna with quadruple band notch characteristic using negative permittivity unit cells,’’ Microw. Opt. Technol. Lett., vol. 62, no. 2, pp. 816–824, Feb. 2020.

Chakraborty, M., S. Pal, and N. Chattoraj, “Quad notch UWB antenna using combination of slots and split-ring resonator,” International Journal of RF and Microwave Computer-Aided Engineering, 2019, doi:10.1002/mmce.22086.

M. T. Islam, R. Azim, and A. T. Mobashsher, ‘‘Triple band-notched planar UWB antenna using parasitic strips,’’ Prog. Electromagn. Res., vol. 129, pp. 161–179, 2012.

L. Peng, B.-J. Wen, X.-F. Li, X. Jiang, and S.-M. Li, ‘‘CPW fed UWB antenna by EBGs with wide rectangular notched-band,’’ IEEE Access, vol. 4, pp. 9545–9552, 2016.

A. Abbas, N. Hussain, M.-J. Jeong, J. Park, K. S. Shin, T. Kim, and N. Kim, ‘‘A rectangular notch-band UWB antenna with controllable notched bandwidth and centre frequency,’’ Sensors, vol. 20, no. 3, p. 777, Jan. 2020.

N. Jaglan, B. K. Kanaujia, S. D. Gupta, and S. Srivastava, ‘‘Triple band notched UWB antenna design using electromagnetic bandgap structures,’’ Prog. Electromagn. Res. C., vol. 66, pp. 139–147, 2016.

J. Y. Siddiqui, C. Saha, and Y. M. M. Antar, ‘‘Compact dual-SRR-loaded UWB monopole antenna with dual frequency and wideband notch char- acteristics,’’ IEEE Antennas Wireless Propag. Lett., vol. 14, pp. 100–103, Sep. 2015.

W.-A. Li, Z.-H. Tu, Q.-X. Chu, and X.-H. Wu, ‘‘Differential stepped- slot UWB antenna with common-mode suppression and dual sharp- selectivity notched bands,’’ IEEE Antennas Wireless Propag. Lett., vol. 15, pp. 1120–1123, Oct. 2016.

Kumar, G., D. Singh, and R. Kumar, “A planar CPW fed UWB antenna with dual rectangular notch band characteristics incorporating U-slot, SRRs, and EBGs,” International Journal of RF and Microwave Computer-Aided Engineering, Vol. 31, No. 7, doi:10.1002/mmce.22676,2021.

Downloads

Published

24.03.2024

How to Cite

Patil, A. M. ., Sharma, S. ., Motekar, H. S. ., Sawant, R. S. ., Kolhe, R. S. ., & Mohite, P. T. . (2024). A Review on Design & Analysis of An Operational Quad Band UWB Antenna with Triple-Band Notch Using EBG Structure. International Journal of Intelligent Systems and Applications in Engineering, 12(19s), 440–444. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/5083

Issue

Vol. 12 No. 19s (2024)

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.

IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.