Design and Development of Two Port MIMO Antenna at ISM Band for WBAN Applications

Authors

  • Pavithra Balaji Department of ECE, Sathyabama Institute of Science and Technology, Chennai, India
  • R. Narmadha Department of ECE, Sathyabama Institute of Science and Technology, Chennai, India

Keywords:

FR-4 substrate, MIMO, WLAN, WBAN, gain

Abstract

A Multiple Input Multiple Output antenna having 2-ports is discussed on this paper, which is presented for WBAN applications. The antenna is presented with the dimensions of 46x20x1.6 mm3. Here, the FR-4 epoxy as the substrate has been used and its loss tangent and relative permittivity are 0.002 and 4.4 respectively. The designed proposed antenna is operating in the frequency of 2.4GHz and 5.8 GHz with reflection coefficient of less than -22dB. Antenna Simulation has been carried out using HFSS. By simulating the designed antenna various parameters like gain, radiation pattern, S parameters, Z - parameters are obtained. An antenna system prototype has been created, and test results indicate that the suggested antenna system performs well in the frequency bands of WBAN applications.

Downloads

Download data is not yet available.

References

Wang, J., Wong, H., Ji, Z., & Wu, Y, “Broadband CPW-Fed Aperture Coupled Metasurface Antenna” IEEE Antennas and Wireless Propagation Letters, vol.18(3), pp. 517 – 520, 2019.

S A Kumar and Thangavelu S, “Design and Analysis of Implantable CPW Fed Bowtie Antenna for ISM Band Applications” Int. J. of Elect. & Comm., Elsevier, vol.68(2), pp.158-165, 2014.

Zhang, Y.-X., Jiao, Y.-C., Zhang, Z., & Feng, S, “Wideband Accurate-out-of-Phase-Fed Circularly Polarized Array Based on Penta-Mode Aperture Antenna Element With Irregular Cavity” IEEE Transactions on Antennas and Propagation, vol.67(1), pp. 638 – 642, 2018.

Yi, X., Su, T., Li, X., Wu, B., & Yang, L, “A Double-Layer Wideband Transmitarray Antenna Using Two Degrees of Freedom Elements Around 20 GHz” IEEE Transactions on Antennas and Propagation, vol.67(4), pp.2798 – 2802, 2019.

S. Ashok Kumar and T. Shanmuganantham, “CPW Fed Implantable Z-Monopole Antennas for ISM Band Biomedical Applications”, International Journal of Microwave and Wireless Technologies, Cambridge University, UK. Vol.7 (5) pp. 529-533, Oct 2015.

Yang, Y.-H., Guo, J.-L., Sun, B.-H., Cai, Y.-M., & Zhou, G.-N, “The Design of Dual Circularly Polarized Series-Fed Arrays. IEEE Transactions on Antennas and Propagation, vol.67 (1), pp. 574 - 579, 2018.

Karthikeya, G. S., Abegaonkar, M. P., & Koul, S. K. “CPW fed wideband corner bent antenna for 5G mobile terminals” IEEE Access vol.7, pp. 10967 – 10975, 2019.

S. Ashok Kumar and T. Shanmuganantham, “Design and Performance of Textile Antenna for Wearable Applications”, Transaction on Electricals and Electronic Materials, Springer, Vol.19(5), pp.352-355, 2018

Zhou, Y., Liu, T., Tang, F., & Tinashe, M. “An unlinkable authentication scheme for distributed IoT application. IEEE Access, vol.7, pp. 14757 - 14766, 2019.

Park, E., Kim, T, & Han,An Efficient Time-shifted Random Access Scheme for Cellular-based IoT Networks. IEEE Communications Letters,vol.23(3), pp.522-525, 2019.

S A Kumar and Thangavelu S, “Implantable CPW fed Circular Slot Antennas for 2.45 GHz ISM Band Biomedical Applications” J. of Ckts, Sys. & Comp., World Scientific Publ, Vol. 24(1), 2015.

S. Soltani, P. Lotfi, and R. D. Murch, “A port and frequency reconfigurable MIMO slot antenna for WLAN applications,” IEEE Transactions on Antennas and Propagation, vol. 64, no. 4, pp. 1209–1217, April 2016.

Saber Soltani, Parisa Lotfi, and Ross D. Murch, “A Dual-Band Multi-Port MIMO Slot Antenna for WLAN Applications” IEEE Antennas and wireless propagation letters, vol.16, pp. 529 – 532, 2016.

Downloads

Published

24.03.2024

How to Cite

Balaji, P. ., & Narmadha, R. . (2024). Design and Development of Two Port MIMO Antenna at ISM Band for WBAN Applications. International Journal of Intelligent Systems and Applications in Engineering, 12(3), 433–436. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/5267

Issue

Vol. 12 No. 3 (2024)

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.

IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.