A Novel Design of Mm-Wave Antenna for WBN Use Cases

Authors

  • Sasikala S. , Sakthisudhan K. ,Kannan R. , Kowsalya P. , Anand Karuppannan , A. Kingsly Jabakumar , R. Senthil Ganesh

Keywords:

Microstrip patch antennas, 5G use cases, Six-pointed star polygon-shaped antenna, CAD-inspired Microstrip patch antenna.

Abstract

This research article proposes a novel Computer-Aided Design (CAD) inspired microstrip patch antenna. The antenna is configured in the cross-sectional view of an equilateral triangle-shaped structure, resembling a six-pointed star polygon. It consists of a middle layer made of 1.5-millimeter (mm) thickness of the Rogers substrate material (RT 6010TM) with a dielectric strength of 2.2; an upper layer made of a conductive patch strip (proposed CAD design); and bottom layers made of ground material, both 0.45 millimeters thick with copper conductive materials.The antenna exhibits a resonance frequency of 3.3 GHz with a return loss of 34.02 dB and a Standing Wave Ratio (SWR) of 1.4 dB. It operates in the S bandwidth, ranging from 3 GHz to 3.9 GHz, within the microwave spectrum. This design plays a significant role in high-speed internet connectivity and enables various 5G use cases such as mid-band 5G deployment, Enhanced Mobile Broadband (eMBB), IoT, and machine-to-machine communication. The simulated structure effectively characterizes antenna design parameters including bandwidth, impedance bandwidth, return losses, SWR, gain, and radiation pattern within the S-band microwave spectrum. The Finite Element Method (FEM) proves to be a reliable configuration in CAD design, and the six-pointed star polygon-shaped structure achieves good agreement with a resonance frequency of 3.3 GHz as observed and plotted in the results.Moreover, the proposed CAD-inspired antenna features a compact profile and is highly relevant for 5G use cases.

Downloads

Download data is not yet available.

References

Novel wideband microstrip monopole antenna designs for WiFi/LTE/WiMax devicesHHM Ghouz, MFA Sree, MA Ibrahim - IEEE Access, 2020 - ieeexplore.ieee.org

High Isolated Four Element MIMO Antenna for ISM/LTE/5G (Sub-6GHz) Applications SANTOSH KUMAR MAHTO1 , AJIT KUMAR SINGH 1 , (Member, IEEE), RASHMI SINHA2 , (Member, IEEE), MOHAMMAD ALIBAKHSHIKENARI 3 , (Member, IEEE), SALAHUDDIN KHAN4 , AND GIOVANNI PAU 5 , (Member, IEEE)

K. Hari Priya; S. Umamaheswari “Next Generation Optimized Patch Antenna for 5G Applications” 2023 2nd International Conference on Advancements in Electrical, Electronics, Communication, Computing and Automation (ICAECA), 16-17 June 2023.

Kapoor, A., & Mishra, R. (2021).Design and optimization of compact wideband patch antenna using genetic algorithm for WLAN communication. 2021 6th International Conference on Signal Processing, Computing and Control (ISPCC), IEEE, pp. 56–61, https://doi.org/10.1109/ ISPCC53510.2021.9609489 .

Prasad, L., Ramesh, B., Kumar, K., & Vinay, K. (2018). Design and implementation of multiband microstrip patch antenna for wireless applications. Advanced Electromagnetics, 7(3), 104–107. https://doi.org/10.7716/aem.v7i3.646

Kapoor, A., Mishra, R., & Kumar, P. (2021). Wideband miniaturized patch radiator for Sub-6 GHz 5G devices. Heliyon, 7(9), 2405–8440. https://doi.org/10.1016/j.heliyon.2021.e07931

Umamaheswari.S, V.S.Akshaya,Vijayadharshini.R,Rohini.R,FrancisAjay.M “E -Slot Microstrip patch antenna for WLAN applications” 2023 9th International Conference on Advanced Computing and Communication Systems (ICACCS),17-18 March 2023. 584 – 588.

Zong-zuo, Y., & Guo, G.-Z. (2017). Improvement of positioning technology based on RSSI in ZigBee networks. Wireless Personal Communications, 95(3), 1–20. https://doi.org/10.1007/s11277-016- 3860-110.1109/ICACCS57279.2023.10112735

. D. Allin Joe, S. Umamaheswari, S. R. Sriram, “A multiband antenna for GSM, WLAN, S-band radar and WiMAX applications”, International Journal of Engineering and Advanced Technology, 8(6 Special Issue 3), pp. 1555–1558, 2019.

K.Sakthisudhan, et al., “Design of miniatured MRI coils for MRI-guided tumor diagnosis and hyperthermia therapy”, Microwave & Optical Technology Letters, Wiley, 66(2), 2024. (Q2)

N. Saranraj &K.Sakthisudhan, “Microstrip coils for MR‐imaging with induced RF heating for hyperthermia”, International Journal of RF and Microwave Computer-Aided Engineering, Wiley, 32(12), 2022. (Q3)

SakthiSudhan K, Saravana Kumar N, “Certain study on improvement of bandwidth in 3GHz microstrip patch antenna designs and implemented on monostatic radar approach for breast cancer diagnosis in microwave imaging system”, Journal of circuits, systems and computers, Vol. 25(2), pp. 165006-1 to 32, 2016.

D Allin Joe; R Karthi Kumar; S Umamaheswari, “ A Defected Ground Structure (DGS) Antenna for WiMAX Applications,” 2021 International Conference on Advancements in Electrical, Electronics, Communication, Computing and Automation (ICAECA), 18 January 2022.

Mahmood, S. N., Ishak, A. J., Saeidi, T., Soh, A. C., Jalal, A., Imran, M. A., & Abbasi, Q. H. (2021). Full ground ultra-wideband wearable textile antenna for breast cancer and wireless body area net work applications. Micromachines, 12(3), 1–16.

Srinivasan, D., & Gopalakrishnan. (2019). Breast cancer detection using adaptable textile antenna design. Journal of Medical Systems, 43(6), 177. https://doi.org/10.1007/s10916-019- 1314-5.

Varma, S., Sharma, S., John, M., Bharadwaj, R., Dhawan, A., & Koul, S. K. (2021). Design and performance analysis of compact wearable textile antennas for IoT and body-centric communication applications. International Journal of Antennas and Propagation, 2021(Article ID 7698765), 12. https://doi.org/10.1155/2021/7698765.

Zhong, M., & Jiang, Y. (2020). L-shaped slot-loaded stepped-impedance microstrip structure UWB antenna. Micromachines, 11(9), 828. https://doi.org/10.3390/mi11090828

Pei, R., Leach, M. P., Lim, E. G., Wang, Z., song, C., Wang, J., Zhang, W., Jiang, Z., & Huang, Y. (2020). Wearable EBG-backed belt antenna for smart on-body applications. IEEE Transactions on Industrial Informatics, 16(11), 7177–7189. https://doi.org/10.1109/TII.2020.2983064

Rajawat, A., & Singhal, P. K. (2020). Design and analysis of inset fed wide-band rectenna with defected ground structure. Journal of Circuits, Systems and Computers, 29(3), 1–15. https://doi. org/10.1142/S0218126620500474

Hussin, E. F. N. M., Soh, P. J., Jamlos, M. F., Lago, H., Al-Hadi, A. A., & Rahiman, M. H. F. (2017). A wideband textile antenna with a ring-slotted AMC plane. Applied Physics A, 123(1), 46. https:// doi.org/10.1007/s00339-016-0627-1

Wang, L., Jianguo, Y., Xie, T., & Kun, B. (2021). A novel multiband fractal antenna for wireless application. International Journal of Antennas and Propagation, 2021(Article ID 9926753), 9. https://doi.org/10.1155/2021/9926753

Downloads

Published

26.03.2024

How to Cite

Sasikala S. ,. (2024). A Novel Design of Mm-Wave Antenna for WBN Use Cases. International Journal of Intelligent Systems and Applications in Engineering, 12(21s), 3238–3243. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/6013

Issue

Section

Research Article