Analysis of Monitoring and Control System in IoT-Based Filling Station
Keywords:
PLC, IoT, MQTT, Blynk, ESP32Abstract
A filling machine or commonly called a filling station is a machine used to fill materials into bottles at industrial factories. This machine will automatically fill the material into the bottle and then proceed to the next process. At this time the filling machine is still operating with technology 3.0 which causes the machine to still be operated directly through the control panel so it is less effective. One of the technologies that can make these machines effective is the Internet, also known as the Internet of Things (IoT). Therefore, in this research, an IoT system design was created which aims to streamline the monitoring and control of workstations. Utilizing the MQTT and ESP32 communication protocols as controllers and 24VDC relays as a bridge for giving and reading signals from the PLC. The results of the research conducted by the system can already monitor and control the station through the Blynk application with an input control delay of 0.0129 seconds while the output reading is 0.012575 seconds and the hopper level notification alarm feature functions when the hopper level is in low level condition, and the system will send an alarm notification to the user.
Downloads
References
S. Wahyu Jadmiko, D. Nono Suharno, and S. Kurniawan Nugraha, “Aplikasi Internet of Things (IoT) untuk Pemantauan Simulator Plant Berbasis PLC-Web Server,” in Seminar Nasional Teknologi dan Riset Terapan (SEMNASTERA), 2020, pp. 28–33.
G. A. Laksamana, P. Santoso, and F. Pasila, “Aplikasi untuk Memonitor PLC Pada Mesin Filling dan Capping,” Jurnal Teknik Elektro, vol. 10, no. 2, pp. 48–53, 2017.
A. R. AL TAHTAWI, T. D. HENDRAWATI, A. ABDURRAHIM, and E. ANDIKA, “Perancangan dan Analisis Kinerja Sistem Kontrol dan Penjadwalan Lampu Berbasis IoT,” ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, vol. 7, no. 3, p. 533, Sep. 2019, doi: 10.26760/elkomika.v7i3.533.
A. Syarif, Harianto, and I. Puspasari, “Rancang Bangun Automatic Liquid Filling Machine Berbasis IoT (Internet of Things),” Journal of Technology and Informatics (JoTI), vol. 2, no. 2, pp. 72–82, Apr. 2021, doi: 10.37802/joti.v3i1.178.
A. Binazar, H. Rachmat, and D. S. E. A. Atmaja, “PERANCANGAN SUPERVISORY CONTROL AND DATA ACQUISITION (SCADA) PADA PROSES PENGEPAKAN TEH DILENGKAPI DENGAN PELAPORAN DATA MENGGUNAKAN GENERIC DATA GRID,” e-Proceeding of Engineering, vol. 2, no. 1, pp. 817–826, 2015.
A. M. Daffa, Y. Saragih, and H. R. Satrio, “UTILIZATION OF TELEMETRY SYSTEMS IN QUAIL FARMING USING THE IOT CONCEPT,” J Teknol, vol. 15, no. 2, 2023, doi: 10.24853/jurtek.15.2.217-224.
H. Haryanto, E. Permata, and N. R. U. Nainggolan, “Sistem Monitoring Proses Produksi pada Mesin Bardi di PT. Tirta Investama (Danone Aqua) Sukabumi Berbasis Web,” Jurnal Ilmiah SETRUM, vol. 3, no. 1, 2014.
T. Pangaribowo et al., “SISTEM MONITORING SUHU MELALUI SISTEM KOMUNIKASI PROGRAMMABLE LOGIC CONTROLLER TO PERSONAL COMPUTER,” Jurnal Teknologi Elektro, vol. 7, no. 3, pp. 175–180, Sep. 2016.
A. Susanto and I. Darisman Jauhari, “RANCANG BANGUN APLIKASI ANDROID UNTUK KONTROL LAMPU GEDUNG MENGGUNAKAN MEDIA BLUETOOTH BERBASIS ARDUINO UNO,” Universitas Muhammadiyah Tangerang, vol. 8, no. 1, 2019.
M. A. Ashari and L. Lidyawati, “IOT BERBASIS SISTEM SMART HOME MENGGUNAKAN NODEMCU V3,” Jurnal Kajian Teknik Elektro, vol. 3, no. 2, pp. 138–149, 2019.
M. Choir Afrian, M. T. Asron, and R. Wicaksono, “PROTOTIPE PENGANGKUT SAMPAH OTOMATIS PADA PINTU ALI DENGAN SISTEM INFORMASI MENGGUNAKAN NODE MCU ESP8266 BERBASIS PLC (PROGRAMMABLE LOGIC CONTROLLER),” Jurnal Autocracy, vol. 5, no. 2, pp. 95–105, 2018, doi: 10.21009/autocracy.05.2.5.
M. Dimas Nauval, H. Rachmat, and M. D. Prasetio, “PERANCANGAN SISTEM MONITORING DAN CONTROLLING MENGGUNAKAN SMARTPHONE PADA STASIUN KERJA DELAY DAN PICK AND PLACE SIMULATOR BOTTLING PLANT DENGAN METODE WATERFALL,” in e-Proceeding of Engineering, 2021, pp. 8198–8207.
R. A. Atmoko, R. Riantini, and M. K. Hasin, “IoT real time data acquisition using MQTT protocol,” in Journal of Physics: Conference Series, Institute of Physics Publishing, Jun. 2017. doi: 10.1088/1742-6596/853/1/012003.
F.- Puspasari, I.- Fahrurrozi, T. P. Satya, G.- Setyawan, M. R. Al Fauzan, and E. M. D. Admoko, “Sensor Ultrasonik HCSR04 Berbasis Arduino Due Untuk Sistem Monitoring Ketinggian,” Jurnal Fisika dan Aplikasinya, vol. 15, no. 2, p. 36, Jun. 2019, doi: 10.12962/j24604682.v15i2.4393.
A. Ridho’i, K. Setyadjit, and B. Era Yordhan, “Sistem Monitoring Suhu Dan Kelembaban Pada Budidaya Jamur Tiram Menggunakan ESP32,” Jurnal FORTECH, vol. 4, no. 1, pp. 20–26, Jan. 2023, doi: 10.56795/fortech.v4i1.4103.
H. P. Ramadhan, C. Kartiko, and A. Prasetiadi, “Monitoring Kualitas Air Tambak Udang Menggunakan NodeMCU, Firebase, dan Flutter,” Jurnal Teknik Informatika dan Sistem Informasi, vol. 6, no. 1, Apr. 2020, doi: 10.28932/jutisi.v6i1.2365.
A. A. Wahid, “Analisis Metode Waterfall Untuk Pengembangan Sistem Informasi,” Jurnal Ilmu-ilmu Informatika dan Manajemen STMIK, 2020, [Online]. Available: https://www.researchgate.net/publication/346397070
W. A. Prayitno, A. Muttaqin, and D. Syauqy, “Sistem Monitoring Suhu, Kelembaban, dan Pengendali Penyiraman Tanaman Hidroponik menggunakan Blynk Android,” Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, vol. 1, no. 4, pp. 292–297, 2017.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.
IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.
