Mapbi3 Perovskite Solar Structure Experimental Optimization: Control of Deposition of Spinning Speed (Comparative Study of Optical and Structural Proprieties)

Authors

  • Aicha Aziza Ayad, Abdelkrim Naas, Ahmed Gueddim, Mohamed Elbar

Keywords:

Perovskite solar cells, MAPbI3, spinning speed.

Abstract

The present paper deals with the stability of halide hybrid perovskite MAPbI3 (CH3NH3PbI3) thin films by an experimental optimization by increasing the Dimethyl sulfoxide (DMSO) solvent ratio (compared to literature) in perovskite solution and the study of deposition spinning speed effect on the structural and optical properties. The samples is deposited by a spin coater in one step with 400, 1500 and 3000 rpm spinning speed. Structural and optical properties of the elaborated samples were studied using X-ray diffraction and UV-Visible spectroscopy. The main results show that compared with other works the DMSO solvent ration raise has a positive effect in the perovskite proprieties, in other hand, the best proprieties of perovskite need an optimal speed deposition; the very high or low speed has a negative effect.

Downloads

Download data is not yet available.

References

T. Miyasaka, impact 2018, 63–65 (2018).

Q.-M. Hong, R.-P. Xu, T.-Y. Jin, J.-X. Tang, et Y.-Q. Li, Organic Electronics 67, 19–25 (2019).

K. Jemli, « Synthése et auto-assemblage de molécules de pérovskite pour la photonique et le marquage », p. 197.

G. Murugadoss, R. Thangamuthu, S. Vijayaraghavan, H. Kanda, et S. Ito, Electrochimica Acta 257, 267–280 (2017).

Rahul et al., Materials Research Bulletin 89, 292–296 (2017).

M. P. Montoya et al., Materials Today: Proceedings 39, 1829–1832 (2021).

I. Mohanty, S. Mangal, S. Jana, et Udai. P. Singh, Adv. Energy Mater. 11, 2002326 (2021).

J. Wei et al., Appl. Phys. Lett. 106, 131904 (2015).

I. Deretzis et al., J. Phys.: Condens. Matter 32, 095501 (2020).

I. S. Zhidkov et al., J. Phys.: Condens. Matter 32, 095501 (2020).

Q.-D. Dao, R. Tsuji, A. Fujii, et M. Ozaki, Organic Electronics 43, 229–234 (2017).

J. Fan, C. Liu, H. Li, C. Zhang, W. Li, et Y. Mai, ChemSusChem 10, 3839–3845 (2017).

S. A. Kahani, E. Maleki, et M. Ranjbar, Journal of Photochemistry and Photobiology A: Chemistry 389, 112218 (2020).

G. S. H. Thien et al., Ceramics International 46, 29041–29051 (2020).

R. Hu et al., Journal of Energy Chemistry 59, 581–588 (2021).

S. C. Ezike, A. B. Alabi, A. N. Ossai, et A. O. Aina, Optical Materials 112, 110753 (2021).

L.-C. Chen, C.-H. Tien, Y.-C. Jhou, et W.-C. Lin, Energies 13, 2438 (2020).

Z. Zhang, Y. Liu, P. Zhang, et Y. Mao, Organic Electronics 88, 106007 (2021).

G. Gordillo, O. G. Torres, M. C. Abella, J. C. Peña, et O. Virguez, Journal of Materials Research and Technology 9, 13759–13769 (2020).

Y.-W. Zhang, P.-P. Cheng, W.-Y. Tan, et Y. Min, Applied Surface Science 537, 147908 (2021).

C. A. López et al., Sci Rep 10, 11228 (2020).

A. A. Ayad, A. Naas, N. Selmi, et O. Meglali, Studies in engineering and exact sciencesTUDIES IN ENGINEERING AND EXACT SCIENCES 5, 306–319 (2024).

Kemerchou et al., J Mater Sci: Mater Electron 32, 3303–3312 (2021).

A. Sami, E. David, et M. Fréchette, in 2010 Annual Report Conference on Electrical Insulation and Dielectic Phenomena 1–4 (IEEE, West Lafayette, IN, 2010).

A. Bouraiou, M. S. Aida, O. Meglali, et N. Attaf, Current Applied Physics 11, 1173–1178 (2011).

S.A.Hassanzadeh-Tabrizi, Journal of Alloys and Compounds 968,171914 (2023).

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuanc, J. Ding, RSC Adv. 5, 60562 (2015).

I. Belaidi, F. Khelfaoui, N. Attaf, A. Azzizi, et M. S. Aida, Phys. Status Solidi A 216, 1900340 (2019).

M. S. Mehde, A. M. Al-Gebori, et A. K. Hantoosh, IOP Conf. Ser.: Mater. Sci. Eng. 757, 012071 (2020).

Downloads

Published

19.04.2025

How to Cite

Aicha Aziza Ayad. (2025). Mapbi3 Perovskite Solar Structure Experimental Optimization: Control of Deposition of Spinning Speed (Comparative Study of Optical and Structural Proprieties). International Journal of Intelligent Systems and Applications in Engineering, 13(1), 147 –. Retrieved from https://ijisae.org/index.php/IJISAE/article/view/7530

Issue

Vol. 13 No. 1 (2025)

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.

IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.