Design And Implementation of Parallel Processing Fir Filter Using Modified Booth Encoding
Keywords:
consumption, proposed, complexity, requirementsAbstract
This project presents a Parallel Processing FIR filter or Full Parallel FIR Filter design implemented using the Modified Booth Encoder (MBE) to achieve high-speed performance. A novel hardware architecture employing fine-grained seamless pipelining is proposed, where pipeline registers are strategically placed not only between components but also across them. This ensures minimal gate delays and maximizes throughput. A precise critical path analysis at the gate level enables an optimal pipelining strategy tailored to throughput requirements. The results show that the fully-parallel FIR filter achieves very high throughput with a substantial reduction in area delay product (ADP) compared to existing systolic designs. The proposed design optimizes MBE encoding and parallel processing to achieve significant enhancements in speed, area, and power efficiency. FIR filters are crucial components in digital signal processing applications, but traditional designs often face limitations. The proposed design employs a pipelined architecture, leveraging MBE encoding to reduce computational complexity. This research investigates the potential of parallel processing and MBE encoding in FIR filter design analysing trade-offs between speed, area, and power consumption.
Downloads
References
S. Majhi, A. Dandapat, and R. Mahapatra, "Design of Very High-Speed Pipeline FIR Filter Through Precise Critical Path Analysis," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 22, no. 2, pp. 346-349, Feb. 2014.
M. Rabaey, A. Chandrakasan, and B. Nikolic, Digital Integrated Circuits: A Design Perspective, 2nd ed., Prentice Hall, 2003.
D. A. Patterson and J. L. Hennessy, Computer Organization and Design: The Hardware/Software Interface, 5th ed., Morgan Kaufmann, 2014.
H. T. Bui, Y. Wang, and Y. Jiang, "Design and analysis of low-power 10-transistor full adders using novel XOR–XNOR gates," IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol. 49, no. 1, pp. 25–30, Jan. 2002.
K. K. Parhi, VLSI Digital Signal Processing Systems: Design and Implementation, John Wiley & Sons, 1999.
S. Lin and D. Costello, Error Control Coding, 2nd ed., Pearson Prentice Hall, 2004.
B. W. Parkinson, "A Review of Booth's Algorithm and Its Application in Computer Architecture," Computer Design and Applications Journal, vol. 5, pp. 20–27, 2011.
C. H. Roth and L. L. Kinney, Fundamentals of Logic Design, 7th ed., Cengage Learning, 2013.
X. Liang, R. F. Demara, "High-throughput and Low-power Multipliers Using Dynamic Operand Gating," IEEE Transactions on VLSI Systems, vol. 16, no. 3, pp. 312–321, March 2008.
Z. Huang and M. Ercegovac, "High-Performance Low-Power Left-to-Right Array Multiplier Design," IEEE Transactions on Computers, vol. 54, no. 3, pp. 272–283, March 2005.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal unless they receive approval for doing so from the Editor-In-Chief.
IJISAE open access articles are licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. This license lets the audience to give appropriate credit, provide a link to the license, and indicate if changes were made and if they remix, transform, or build upon the material, they must distribute contributions under the same license as the original.


